Chopard – Grand Monaco Historique Pirx

Chopard - Grand Monaco Historique Pirx1

The Automobile Club of Monaco organizes, since 1997, the Monaco Historic Grand Prix. A full-fledged career in the glamor and essence of motoring meet to relive the thrill of seeing cars racing legend. Chopard, as sponsor and official timekeeper for this test, this competition celebrates with the stopwatch “Grand Prix de Monaco Historique”.

Grand Prix de Monaco Historique
The “Grand Prix Historique Monaca” is a test car that was first held in 1997, the second edition was in 2000 and has since been held every two years and two weeks before the celebration of the Monte Carlo Grand Prix Formula 1. The ninth edition this year will be held on the 10th of May to the trials, and on 11 May the competition. The event was a true test of speed is organized by the Automobile Club Monte Carlo and runs through the legendary circuit of the Principality conceived in 1929 by Antony Noghes.

The series can be seen at this year’s seven distributed as follows. Series A: latest cars for 1939 Series B:. Motor from Formula 1 and Formula 2 built before 1961 Series C:.. Vehicles sport they have competed in international events between 1952 and 1955 Series D: Formula for cars. 1 of 1,500 cc engine between 1961 and 1965 Series E:. Motor Formula 1 between 1966 and 1972 Series F: F1 cars between 1973 and finally 1978 Series F:. Motor of 2000 cc Formula 3 engine between 1974 and 1978.

New collection of Chopard

This edition, which is the ninth, the Monaco Grand Prix Historique be held on 10 and 11 May 2014, as usual, two weeks before the Monaco Grand Prix Formula 1 – it is also the seventh consecutive in Chopard is a sponsor and official timekeeper. To date, Chopard presented a new chronograph model commemorating the race, but this year, the Geneva firm decided to develop an entirely new collection in which the chronograph will be the centerpiece. The chronograph “Grand Prix de Monaco Historique” is the first model of this new collection which debuts. A watch racing, both literally and metaphorically.

A larger box

Chopard’s bid to create a new collection is totally decided and this year’s model has no little new about the models of the previous editions. The aesthetic without losing the automobile spirit was completely remodeled. The box, made of titanium, has a larger size with 44.5 -2.1 millimeter diameter than the preceding box-models and 13.9 of thickness, and a more robust and customized design. The design of the box is the classical three-body with bezel, middle and background.

The profile of the bezel, executed in steel, similar to engine piston rings with scrapers. The two rings have a polished mirror finish, while the two slits have a black finish. A small detail that gives complexity and volume bezel. Its front is an insert of black aluminum with tachymeter scale numerals in silver and yellow indices.

The case middle has a satin finish, the handles are short and sharp lines. Both the crown and pushers of the chronograph functions have details that link the world of motor. Both pushbuttons incorporate a large drive slip at the front instead of the smooth buttons in the previous models. The crown, bolted to the middle, has generously sized grooves that give robustness. At the top you can see the engraving of a sports steering wheel with three arms and their characteristic round holes in them. The crown is flanked by two guards.

Also new this year is the closed bottom opposite the transparent background of recent editions. This is used for showing the logo of the “Grand Prix de Monaco Historique”. The fund is bolted to the middle by screws with a head resembling those used in motorsports.

Chopard - Grand Monaco Historique Pirx2

The housing assembly features a waterproof cataloged 100 meters, which is 10 atmospheres.

Aesthetics in the automotive field

The white area is presented which gives a circular volume and on which the other indications guilloche settle. The indications chronograph time measurements are vertical. A twelve-hour sub dial black color with a guilloche circle shows the counter thirty minutes. Six hours find another chronograph subdial with meter twelve hours and the same aesthetic as above. A nine hours a circular sub-dial and white background with guilloche seconds showing schedules.

Numerals are printed three sub-dials and indications have a batch script with thick strokes reminiscent of drawing pianos in racetracks.

The time stamps are rectangular in shape finalized in a tip pointing to the center of the sphere. All of them incorporate luminescent material and a smooth area in which the numeral minute schedules which also corresponds to the second hand is printed. All indicators are as united by a black ring with indications of minute white.

Encircling the latter a yellow ring serves reading fractions of second’s chronograph. It is a detail that should not go unnoticed but if you look closely you will see that there are three indications among the latter. If we add to these three indications the spaces between them to four-plus second-own indication of the scale will have eight black-references that allow us easy reading of the tenth in the treadmill for needle and matching the 1/8 of a second which is able to measure movement equipping the watch.

The hour and minute hands recall the particulars of watches from a car dashboard. Are generously sized, chamfered and focus part is filled with luminescent material, which allows reading in low light environment. The hands of the subdials are simple needle-shaped. The treadmill is stylized and topped with an arrowhead. The color of the hands showing the signs are chronograph yellow thus stand out from the black counters and are consistent both directions on the tachymeter scale bezel, as the ring that surrounds the area that allows the reading of the tenths of a second chronograph.

Within three hours, as a black plate with white script, the evidence that it is the anniversary model of the “Grand Prix Historique Monca”. Also a window three hours in the field to see the disk enables the date, in black and white also with the spelling.

A movement of competition

The movement that gives life to this model is based on a mythical caliber between chronographs: the Valjoux 7750-7750 ETA’sa today. This is one of the movements with chronograph function most used today because it proved to be a reliable, sturdy caliber and they can expect good performance both chronograph and lap times. Not surprisingly this model, like its recent predecessors, has chronometer certificate issued by COSC, which attests to its high performance driving variation regardless of the position of the clock and the conditions of environmental temperature.

Chopard - Grand Monaco Historique Pirx3

The construction of this type movement is integrated, its mechanical design has been conceived from the beginning to incorporate the chronograph function. The system used for activating different functions of the push buttons through cam type is. In particular there are three overlapping cams, each in a different way, allowing spread the movement buttons to perform three basic functions Chronograph: start leaving, stop and reset the treadmill and the needle counters.

The clutch system used to connect the shooting with the chronograph hour shoot is of the oscillating pinion. This is a shaft with a sprocket at each end connecting each with a shoot. When you enable this Chronograph pinion tilt oscillation so as to connect the two shooting.

Wheel assembly / spiral 28,800 beats per hour is equivalent to an oscillation frequency of 4 Hz and the regulation system of the gear change is made via an index which acts eccentrically on the racket. The shock system that protects the wheel axle pivot is Incabloc type.

One of the most unique features of this movement lies in transmitting vibration when the rotor rotates, so dizzying, counter-charging dock motor sense is a unidirectional rotor load in one direction of rotation. It is a pleasure to see how purrs in hand.

It is equipped with a single barrel that provides a power reserve of up to 46 hours.

Exclusive from Oris


Swiss watchmaker Oris introduced the world’s first mechanical wrist watch with integrated barometric altimeter (altimeter) – Big Crown ProPilot Altimeter. New pilots addressed, climbers, researchers, word, all those whose work or hobby is connected with height.

Watch Big Crown ProPilot Altimeter presented in two versions: with markings in meters and feet markings.


Round watch case diameter of 47 mm made of steel. With a high level of resistance to water (up to 100 meters), this watch will be useful not only in height, but under water. Note that there are two winding heads: first – to “2 hours” with engraved brand name for a patented screw head control altimeter “4 hours” engraved «ALT SET».

So, how this function works. To activate the altimeter must install control head altimeter to “1” (unscrew the head until the red ring). When the crown is pulled out to position “2”, you can calibrate the altimeter. Once installed, the clock shows the current altitude using a yellow indicator, red LED will show the air pressure. On the periphery of the dial you can see the markup altitude.

This rate may be measured in the range from 0 to 15,000 feet or from 0 to 4500 m (depending on the variant model). Scale air pressure recessed between altimeter and the central part of the dial. If you measure the height of unnecessary head can be turned to position “0”.


Little about other characteristics of the model. Grooves on the bezel give the model a brutal appearance. Sapphire crystal with anti-reflective coating protects the dial matte black with Arabic numerals, hour and minute hands coated with fluorescent compound. Inside the clock mechanism installed Swiss Oris 733 (based on the Sellita SW200) Automatic power reserve of 38 hours. Hours can be textile or leather strap, steel bracelet.

Longines Conquest Heritage 1954-2014


Nothing less than 60 years meets the brand Longines Conquest. To celebrate, the Swiss watch manufacturer has just introduced the limited collection Longines Conquest Heritage 1954-2014. Four clocks inspired the first creations of this line in boxes of steel, yellow gold or rose gold.

Following the tradition of the famous model, new versions feature a gold medallion and enamel in the bottom of the box that looks the “seal of quality gold Longines”

It was the day May 5, 1954, when registered their brand Longines “Conquest” at the Federal Office for Intellectual Property. Immediate success with the public, these early clocks quickly associated with the timing feats, such as measuring the speed record for a transatlantic crossing. To celebrate this limited edition Longines Conquest Heritage 1954-2014 presents several models in steel, yellow gold or rose gold.

The steel model with silver dial takes effect “sunbeams” First Watch 1954 Conquest. Yellow gold model wearing golden sphere and reinterprets a piece which was then presented as “the new flagship of the line Proud Conquest”.


The gold medallion and enamel in the background that distinguishes the collection with the phrase “seal of quality gold Longines” comes in two versions: the seal of the gold pieces and represents a constellation of steel parts is a fish. Conquest Heritage 1954-2014 All models are fitted with a bracelet of black alligator skin. Each model is numbered. The gold edition is limited to 60 copies and exclusive steel 600 copies.

Collection Features Longines Conquest Heritage 1954-2014

  • Calibre: Calibre Automatic mechanical movement L633 (ETA 2824/2) 11 1/2 lines, 25 jewels, 28,800 vibrations per hour Power reserve 38 hours
  • Case: Round, Ø 35 mm, steel, yellow gold or rose gold, Hesalite crystal, Screw-down decorated with a gold medallion and enamel
  • Water resistant to 3 bar (30 meters)
  • Dial: Silvered effect “sunbeams”, 12 applied indexes, pink or yellow with Super-Luminova® Gold 12 applied indexes and applied hour circle
  • Hands: “Dauphine” or yellow roses with Super-LumiNova® in the hours and minutes
  • Bracelet: Black alligator with buckle
  • Price: steel Model: 1.160 € Models in pink or yellow gold: € 3,710

Firshire Megarotor Big Date from Paul Picot

Brand new Paul Picot is a classic watch Firshire Megarotor Big Date, collected based on the automatic caliber with a 42-hour power reserve. The novelty round case diameter of 42 mm 316L stainless steel or 18-carat pink gold. Water Resistant – 50 meters.


Dark blue dial, sapphire glass enclosed antiglare, equipped with overhead hour indexes, central arrows Dauphine, a double date aperture at 12 o’clock, and the counter at 6 o’clock. The central part of the dial is decorated with vertical lines. Watch Firshire Megarotor Big Date supplied on a dark blue leather strap with folding clasp. Launch of Firshire Megarotor Big Date is limited – 400 copies.